Best Seller

PSBImagine X1T

Attribute:

Modest size, monumental performance A deceptively thin and discreet floor standing speaker, the Imagine X1T has wide bandwidth and high SPL output capabilities that defy its small size. A seamless blend of design and hifi performance, the X1T is able to meet the demands of your multi-channel, or stereo setup. Capable, energetic and attractively priced, these speakers pack a mighty punch.

Colour

Share

Brand : PSB

Share

Size-defying power
The Imagine X1T Tower Speaker is a dual-woofer transitional two-and-a-half way speaker with identical 5¼” (133mm) woofers that work together at the lowest frequencies but crossover at different frequencies to integrate better with room acoustics and give the best dispersion and power response. Imagine X models are all carefully matched in timbre, giving you the freedom to combine any of the models to work together in a variety of different rooms and system setups.

Dynamic accuracy
Like all woofers in the Imagine range, the cone materials have been carefully engineered for optimal control, allowing for a simpler, more cost effective crossover design. Tonal, spatial and dynamic accuracy are at the forefront of this speakers design which includes the Imagine one-inch titanium dome tweeter. The X1T fills the room with a refined mix of high and low frequencies that blend beautifully together.

Bring your space to life
Placement throughout the home is effortless thanks to the smart, minimalist design of these speakers and their small footprint. As the smallest floorstanders in the Imagine X Speaker line up, the X1T’s can be easily incorporated into your space. Their modest size combined with a handsome cabinet design will suit any room and compliment many different system setups without any added clutter.

200 watts input power
1” (25mm) titanium dome with ferrofluid neodymium magnet
2 x 5¼” (133mm) clay/ceramic reinforced injection molded polypropylene cone woofers
Bass reflex (ported) design
Two sets of gold-plated five way binding posts can be bi-wired or bi-amped

Frequency Response
On Axis @ 0° ±3dB
35-23,000Hz
On Axis @ 0° ±1 1/2dB
48-20,000Hz
Off Axis @ 30° ±1 1/2dB
48-10,000Hz
LF Cutoff -10dB
30Hz
Sensitivity
Anechoic Chamber
88dB
Listening Room
90dB
Impedance
Nominal
8 Ohms
Minimum
4 Ohms
Input Power
Recommended
20 - 200 Watts
Program
200 Watts
Acoustic Design
Tweeter (Nominal)
1” (25mm) Titanium Dome with Ferrofluid

Neodymium Magnet
Woofer (Nominal)
2 x 5 1/4” (133mm) Injection Moulded Clay/Ceramic reinforced

Polypropylene Cone

Rubber Surround / Dual Magnet
Crossover
1,800Hz, LR4, 800Hz
Internal Volume
1.42 cu ft (40.2L)
Design Type
Bass Reflex Front Port
Dimensions / Weights / Finish
Size (W x H x D)
8 1/4 x 34 1/2 x 15 5/8” *

208 x 874 x 395mm
Weight
Net - 38lb (17.3kg)/each

Powered by MakeWebEasy.com